ENCOR® 2793 pure acrylic binder for difficult substrates
ENCOR® 2793 is a functionalized pure acrylic waterborne binder that has a unique combination of multi-substrates adhesion and stain blocking performances. Formulators can easily create waterborne coatings with standard additives, such as multi-substrate primers, wall paints, wood lacquers, stain and tannin blocking primers or primer and topcoat “2 in 1” systems.
ENCOR® 2793 has an excellent adhesion on wood, concrete, ceramic, plastics and many other substrates. It is outstanding for stain and tannin blocking. It even prevents the knots of the wood, such as pine, from bleeding and blistering.
- Easy to formulate into waterborne coatings with standard additives
- Outstanding adhesion on many substrates
- Stain blocking, tannin blocking, knot blocking
- APEO- and formaldehyde releaser-free
|Total Solids, % by weight||43|
|Average Particle size, nm||100|
|Viscosity at 23°C, mPa.s (Brookfield RVT , 20rpm)||1000 max|
|Minimum Filming Temperature (MFFT), °C||15|
1Typical values not to be considered as sales specifications.
This video depicts the mechanism of action of ENCOR® 2793
Easy to formulate
ENCOR® 2793 optimizes adhesion and stain-blocking performance as an all-in-one binder for coating formulations. In the table below, we propose two paint formulation guidelines with ENCOR® 2793 with standard additives.
|Dispersant, such as
|Thickeners, such as
CoapurTM 830 W
We can find many different substrates in our houses. Waterborne binders can have difficulties with good adhesion on flat surfaces, such as plastics, ceramics, metals, etc. ENCOR® 2793 enables the formulation of one coating that has a durable adhesion on virtually any substrates that can be found in our house.
Test: adhesion cross test according to ISO 2409
- One layer of paint is applied on the substrates at 200µm wet thickness
- After the required drying time, a grid is cut on the surface of the coating
- An adhesive tape is applied and pulled
In the Table 1, we observe the result of the test ISO 2409 performed with a paint formulated with ENCOR® 2793 at PVC 40%.
Quotation: 0 = perfect adhesion to 5 = no adhesion
Result of the adhesion test, ISO 2409, with ENCOR® 2793 formulated in a paint at PVC 40%
|Time after application||ENCOR® 2793 in paint PVC 40%|
Some wood species like pine and oak are difficult to cover with waterborne coatings because they contain tannins. Tannins are hydrophilic molecules that can migrate in such coatings, leading to their coloration. ENCOR® 2793 interacts with tannins and prevents the wood substrates from bleeding.
The picture below represents the blocking mechanism of paint with ENCOR® 2793. Two coats are applied on a tannin-rich wood (i.e. pine, oak, Merbau, etc.). The first coat blocks the majority of the tannins. The second coat acts as a topcoat and blocks the last molecules.
Test: tannin blocking (internal method)
- Two layers of the paint are applied on a Merbau panel at 150g/m² (24h between the two coats)
- 24h after the second layer the panel is put in a climatic chamber for two weeks
• Aging cycle: 12h at 90% relative humidity and 40°C / 12h at 35% relative humidity and 40°C
- dE is measured (reference: paint applied on a Leneta card 2A)
Merbau wood is an exotic wood with a very high concentration of tannins.
The pictures below show the Merbau wood panel and the results after performing the test conditions with a paint with ENCOR® 2793 at PVC 25% and a standard acrylic satin paint. We observe the results of the test with one layer and with two layers of paint.
Merbau wood panel
Standard Acrylic satin paint
ENCOR® 2793 (PCV 25%)
Test: knot blocking (internal method)
- A pinewood panel with a visible knot is selected
- Two layers of the same paint are applied on the panel at 150g/m² (24h between the two coats)
- The coated panel is dried under 23°C / 50% relative humidity for 7 days
- Once dried the panel is put in the QUVA condensation test chamber for 1 week
We observe the general aspect of the coating after the QUVA condensation test. The pictures below shows the pinewood panel with its knot and the results after performing the test.
Paint at PVC 25%
with ENCOR® 2793
Paint at PVC 25%
with a standard acrylic
Test: stain blocking
- A substrate, for example a filter, is stained
- Two layers of the same paint are applied at 150 g/m² on the stained filter, 24h drying between the layers
- After 24 hours drying time at 23°C / 50% relative humidity, the dE is measured on top of the stained coating (reference: paint applied on a Leneta card 2A)
The Table 2 gives the measure of the dE as explained in the test conditions.
Stain blocking test results